Sold Out
Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all requirements of SAE 100R13
SAE 100R13 HoseSpecifications
| Item | Inside Dia (in.) | Outside Dia (in.) | Max Working Pressure (PSI) | Min Burst Pressure (PSI) | Min, Bend Radius | Coil Lenght. |
| R13-12 | 3/4" | 1.26" | 5,000 | 20,000 | 9.5" | 100 FT |
| R13-16 | 1" | 1.52" | 5,000 | 20,000 | 12" | 100 FT |
| R13-20 | 1-1/4" | 1.95" | 5,000 | 20,000 | 16.5" | 100 FT |
| R13-24 | 1-1/2" | 2.25" | 5,000 | 20,000 | 20" | 100 FT |
| R13-32 | 2" | 2.879" | 5,000 | 20,000 | 25" | 100 FT |
This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis (HFD).
*Coil lengths vary in length depending on current stock at time of order. Charges will be adjusted to length being supplied at time of shipment